不锈钢加工焊接时候的注意事项 - 2018注册彩金网站,注册送彩金网站,2018年最新白菜彩金

不锈钢加工, 激光切割加工,不锈钢制品加工,德航隆工(北京)机电设备有限公司 http://www.bjsnst.com

全国2018注册彩金网站热线:13901087230
不锈钢新闻Stainless steel news

联系我们CONTACT US

联系人:康先生
电话:010-87607030(不锈钢加工)
      010-87607230(激光切割)
传真:010-87554983
邮箱:13901087230@163.com

地址:北京市朝阳区三台山路小红门不锈钢城

不锈钢新闻Stainless steel news

您目前所在位置:首页 > 不锈钢新闻

不锈钢加工焊接时候的注意事项

日期: 2014-01-11 信息来源: admin 浏览次数【119

    北京圣恩斯特商贸有限公司位于北京朝阳区小红门不锈钢城,不锈钢加工包括刨、剪、折、冲等2018注册彩金网站,激光切割机采用的是从事瑞士进口百超激光切割设备。
   我们从事不锈钢加工行业多年,那么今天我们就为大家来介绍一下在不锈钢加工焊接的时候我们应该注意哪些问题,我们

因该如何进行真确的操作,不当的操作会发生哪些问题?

1.要保持很好的工作环境。
2,在焊接的时候一定不要佩戴专业的胶质手套进行加工,因为在焊接的时候温度过高,胶质的手套很容易被高温所融化。
3.在焊接的过程中千万不要用手去触碰工具。
4.不锈钢板下料时,应将不锈钢板移至专用场地下料,严禁在不锈钢材料垛上直接切割下料。
5.采用手工电弧焊焊接时,在接头二侧应有100mm范围的防飞溅涂层,以易清除飞溅物。
6.格控制不锈钢压力容器的焊缝返修次数,有抗晶间腐蚀要求的,焊缝返修后仍应保持原有要求。
7.不锈钢压力容器的制造应有独立、封闭的生产车间或专用固定生产场地,应与碳素钢制品严格隔离。

以上文章来自于:http://www.bjsnst.com   请大家请勿转载。

 

St. Ernst Beijing trading company located in Beijing city of Chaoyang District, stainless steel, stainless steel processing including planing, cutting, folding, and other services, laser cutting machine using

Is engaged in the import of Swiss Bystronic laser cutting equipment.

We are engaged in the processing of stainless steel industry for many years, so today we introduce welding in stainless steel processing, we should pay attention to what the problem, we

Because of how correct operation, improper operation will occur and what problem?

1 to maintain a good working environment.

2, in the welding time of rubber gloves must not wear professional processing, because of high temperature in the welding time, glial gloves very easily by high temperature melt.

3 during the welding process do not use the hand to touch the tool.

4 stainless steel plate, stainless steel plate to move to the site should be special materials, is strictly prohibited in the stainless steel material stack directly cutting.

The 5 is welded by manual arc welding, the splash proof coating joint two side should be 100mm range, easy to remove splash.

6 control of stainless steel pressure vessel weld repair times, with intergranular corrosion resistance requirements, repaired weld should remain the original requirements.

7 stainless steel pressure vessel manufacture should be independent, closed production workshop or special fixed production sites, should be in strict isolation and carbon steel products.



新闻、技术文章、资料下载网站声明
资料编辑人:小王
北京不锈钢
电话: 13901087230


>> 激光切割新闻更多 >>

博聚网