2018年最新白菜彩金给实体经济注入新的动力 - 2018注册彩金网站,注册送彩金网站,2018年最新白菜彩金

不锈钢加工, 激光切割加工,不锈钢制品加工,德航隆工(北京)机电设备有限公司 http://www.bjsnst.com

全国2018注册彩金网站热线:13901087230
激光切割新闻Laser cutting news

联系我们CONTACT US

联系人:康先生
电话:010-87607030(不锈钢加工)
      010-87607230(激光切割)
传真:010-87554983
邮箱:13901087230@163.com

地址:北京市朝阳区三台山路小红门不锈钢城

激光切割新闻Laser cutting news

您目前所在位置:首页 > 激光切割新闻

2018年最新白菜彩金给实体经济注入新的动力

日期: 2016-09-16 信息来源: 德航隆工 浏览次数【49

        随着国内房地产泡沫的日益化严重,激光切割德快速发展,无疑是给中国的实体经济注入了新的动力。

  激光加工产业在国内市场广泛。中国是制造业大国,国内加工设备将逐步升级,激光设备行业的发展将更为迅速。特别是汽车、半导体和电子制造产业的发展使中国的激光市场极具潜力。
    激光切割通过名字我们就知道它是用来切割材质的设备,通过激光来实现切割的目的,因为青岛激光切割有众多优点,下面一一来看看吧。

     第一、特别精准,一般都是设置好的,定位特别准确,也没有很大的切缝,激光束集结的光点十分小。

     第二、功率密度大,材质快速的就能够被加热,切口的宽度十分小,速度很快,而且切割的效果很好,它不会接触到物体,切边基本上不会受到热的影响,不会产生变形的情况,能够消除塌边的状况,也不会有二次加工的情况产生。

    第三、切面特别光滑,没有毛刺的产生,切口是很精细的,对工件没有任何伤害,因为它是不接触材质的,不会划伤切割的物体。任何形状的材质都可以切割,它有很高的柔韧性,能够加工很多图形。也能够切割塑料皮革等材质。
    就加工金属板材而言,采用激光切割加工工艺不仅可以节约昂贵的模具费用,而且可以缩短加工周期。在产品更新周期越来越短的今天,激光切割加工工艺对新品开发,单件小批量生产和多品种轮番生产有着明显的优势。许多金属材料,不管它有什么样的硬度,都可以用激光进行无变形的切割。大多数有机与无机材料都可以用激光切割加工。文章来源:(http://www.bjsnst.com)
   With the domestic real estate bubble is becoming more and more serious, the rapid development of laser cutting, no doubt to China's real economy has injected new impetus.
Laser processing industry is widely used in the domestic market. China is a big manufacturing country, the domestic processing equipment will be gradually upgraded, the development of laser equipment industry will be more rapid. Especially the development of automobile, semiconductor and electronics manufacturing industry.
The development of China's laser market has great potential.
Laser cutting by name we know it is used for cutting materials by laser equipment, to achieve the purpose of cutting, laser cutting because Qingdao has many advantages, come see below.
First, particularly accurate, are generally set up, positioning is particularly accurate, there is no large cut seam, laser beam assembly of light spot is very small.
Second, high power density, material can be heated rapidly, notch width is very small, very fast, and the cutting effect is very good, it does not come into contact with the object, trimming basically not be thermal effects, no deformation, can eliminate the edge collapse situation, there will not be generated two processing conditions.
Third, the plane is particularly smooth, no burr, the incision is very fine, no damage to the workpiece, because it is not contact material, will not scratch the cutting object. Any shape of the material can be cut, it has a high flexibility, able to process a lot of graphics. Also be able to cut plastic leather and other materials.
In the process of metal plate, the laser cutting process can not only save the cost of die, but also can shorten the processing cycle. In the product update cycle is shorter today, the laser cutting process of new product development, small batch production and a variety of alternative production has obvious advantages. A lot of metal materials, no matter what kind of hardness, can be used to carry out the deformation of laser cutting. Most organic and inorganic materials can be processed by laser cutting. Article source: (http://www.bjsnst.com)



新闻、技术文章、资料下载网站声明
资料编辑人:admin

电话: 010-87607030


>> 不锈钢新闻更多 >>

博聚网